Limited Time Offer!
Selling Price -$4,950.00
2013 Exmark Zero-Turn Riding Mower Lazer® Z S-Series LZS801KA724
With the S-Series, you can choose from eight different engines, including an eco-friendly propane model. Four UltraCut™ Series 4 cutting decks are available with widths up to 72 inches. The Deck Support System uses a Panhard rod system adapted from NASCAR.® It eliminates deck sway and moves lateral forces away from deck struts, reducing wear.
- 2013
- Exmark
- Lazer Z® S-Series
- LZS801KA724
- Riding
- Kawasaki®
- FX801V
- 801
- Heavy-duty canister air filtration system
- Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors
- Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
- 12-gallon (45.4-L), single fuel tank with single fill location.
- Allows unit movement without engine running.
- Deck: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- 84.9 in. (215.6 cm)
- Deck: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- 3 Blades at 24.50" Length, Tip Speed: 18,500 fpm. (Aprox)
- Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
- Drive Tires Parking Brake: 24 x 12-12, Turf Master® Lever-actuated disc brake.
- Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver.
- 12-volt
- 15-amp
- 1208 lbs
- 86.1 in. (218.7 cm)
- 70 in. (177.8 cm)
- 3 Year Comm / 5 Year Cons
- 313664870
- 72
- Fabricated
- $4,950.00
- Milford, Delaware
- Pre-Owned
- 85085
- 2013
- Exmark
- Lazer Z® S-Series LZS801KA724
- Kawasaki
- 25.5
- 2092
- Gas
- Available
- 84.9 in. (215.6 cm)
- 70 in. (177.8 cm)
- 313664870
- 72
- Fabricated