2024 Exmark Turf Tracer X-Series TTX650EKC52400
- Year 2024
- Make Exmark
- Model Turf Tracer X-Series
- Engine Model: ECV650 | Series: Command™ EFI | Spec: 3017
2024 Exmark Turf Tracer X-Series TTX650EKC52400
2024 Exmark Turf Tracer X-Series TTX650EKC52400
By virtually any measure, the Turf Tracer X-Series represents the definitive, full-featured hydro mower. Whether you choose the 52- or 60-inch cutting deck, the UltraCut™ Series 4 with splined spindle blade driver is up to the toughest jobs. As are the X-Series engines—Kohler® EFI. Ground speeds up to 6.75 mph, and up to 2.25 in reverse, also rank the Turf Tracer X-Series among the most productive mowers in its class.
Features may include:- Patented Enhanced Control System (ECS)
- Superior Air Filtration
- Superior Cut Quality
- Floating Deck
- Clutch Performance
- Deck Options
Engine
Air Filter
Heavy-duty canister air filtration system
Displacement
694
Engine Manufacturer
Kohler
Engine
Model: ECV650 | Series: Command™ EFI | Spec: 3017
Rated Engine Speed
3,600 rpm
Fuel System
Fuel Type
Gas EFI
Fuel System
Electronic Fuel Injected
PTO
PTO Type
Engagement: Electromagnetic 200 ft-lbs clutch.
Drivetrain
Drive System
Hydro-Drive | Description: Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1" (2.54cm) tapered shafts. | Drive Wheel Release: Allows unit movement without engine running.
Steering
Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Brakes
Parking Brake
Lever-actuated mechanical compression.
Wheels & Tires
Tires, Front Specification
11 x 4.0-5, smooth tread, semi-pneumatic. | 18 x 8.5-8, 4-ply Turf Master®
Electric
Electrical
12-volt battery with 20-amp alternator.
Operational
Operating Speed
Infinitely variable speed selection from 0– 6.75 mph (10.9 kmph) forward, 0–2.25 mph (3.6 kmph) reverse.
Top Speed
Blade Tip Approximately: 18,500 fpm.
Dimensions
Cutting Width
52"
Height
Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments. | 45.0 in. (114.3 cm)
Length
3 Blades at: 18.00" | 84.8 in. (215.4cm)
Width
64.8 in. (164.6 cm)
Capacities
Fuel Capacity
5-gallon (18.9-L) fuel tank.
Weights
Weight
Curb: 720 lbs
Features
Features
Caster Forks: .38" thick caster yoke arms | Safety Package: Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine | Enhanced engine hour meter | UPC: 193308000138 | Deck Lift: Manual lift with hairpin from hole to hole for position adjustment. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Spindle Type
Blade: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Construction Material, Deck
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.